Special case for the safe transport of Lithium Ion batteries! A must for every pedelec owner! About six million Germans already own an e-bike or pedelec. The industry is booming. Dealers are therefore increasingly faced with the challenge of storing and transporting lithium-ion batteries as an energy source for these bikes. For transport they need a certified and safe solution, because lithium ion batteries are always classified as dangerous goods, regardless of whether they are new and intact, used or even damaged. Safe storage is also important for owners of e-bikes and pedelecs, for example if they do not use their bikes for a long time outside the season and have removed the batteries.B&W International has now developed the outdoor.case type 6040 with Cirrux fiberglass inlay - the first case that is also certified for the transport of defective lithium-ion batteries over land, water and in the air* (certificate no. 190313, Belgian Packaging Institute BVI). As the batteries are highly flammable and have explosive properties even when intact, the special case had to pass extensive tests for hazardous goods packaging in order to be certified for the transport of lithium ion batteries including lithium ion polymer batteries according to UN regulation 3480. The case is certified for the transport or storage of two Li-Ion batteries with a capacity of up to 750Wh per battery.For the outdoor.case type 6040, B&W International uses an adapted Cirrux fiberglass cushion as an inlay. This special padding material is characterized by the fact that it is neither flammable nor conductive and serves as thermal insulation. The cushion filled with glass fibers is protected against short circuits and is absorbent. Even leaking battery acid has no negative consequences. Since Cirrux as a cushion is more pressure-elastic than granulates, the material can neither dust nor crumble.All features at a glance:Extremely stable case: Polypropylene (PP) housingcertified according to STANAG 4280, DEF STAN 81-41 and ATA 300stackabledustproofwatertight (IP 67 protection)Temperature stable from -30 °C to +80 °CAirworthy for flight: automatic air pressure compensation valve2 eyelets for padlock (Ø 7 mm)Inner dimensions: 476 x 356 x 124 mm | 18.7 x 14.0 x 4.9 inchOuter dimensions: 512 x 420 x 148 mm | 20.2 x 16.5 x 5.8 inchWeight: 6 Kg | 6 IbVolume: 21.0 LErgonomic two-component handleTwo-stage closuresOptional lift-off hinge for removable lid30 years warrantycolor: black*Please note that the certification for air transport refers exclusively to cargo flights. In addition, it is a legal requirement that lithium-ion batteries with a capacity of > 100 Wh may not be taken onto passenger aircraft.The shown case content is not included in the delivery.

Die Facheinteilung passgenau für den Typ 1000 kann schnell und einfach an deine individuellen Bedürfnisse anpassen werden. SO INDIVIDUELL WIE DU: du kannst die Facheinteilung individuell auf deine Bedürfnisse anpassen. Ob Drohne, Kamera, Angelausrüstung, Jagdausrüstung oder was auch immer du schützen möchtest, mit dem Einsatz von B&W bist du auf der sicheren Seite! SICHER IST SICHER: die Facheinteilung von B&W bietet dir deine individuelle Lösung für jeden Anwendungsbereich und setzt dabei Maßstäbe für Zuverlässigkeit, Qualität und Sicherheit. WIR MACHEN ES DIR EINFACH: die unterschiedlichen Stege kannst du dank Klett & Flausch immer wieder einfach und schnell konfigurieren. Zudem ist der gepolsterte Koffereinsatz aus abwaschbaren Gewebematerial leicht zu reinigen. UNSER QUALITÄTSVERSPRECHEN: genau wie die Koffer, muss auch das Zubehör von B&W umfangreiche Tests bestehen, bevor es auf den Markt kommt. So kannst du dir immer sicher sein, das B&W für höchste Qualität steht. Mit den Produkten von B&W sind deine Wertsachen optimal geschützt. DAS BEKOMMST DU: 1x Facheinteilung, 1x Noppenschaum für den DeckelDer gezeigte Koffer ist nicht im Lieferumfang enthalten!

Mit der komfortablen Deckeltasche hast du im Handumdrehen Platz geschaffen für Dokumente, Schreibunterlagen, Bedienungsanleitungen oder ein Tablet PC. SICHER IST SICHER: dank der praktischen Dokumentasche, hast du nicht nur deine wichtigsten Dokumente oder dein Tablet schnell zur Hand, durch den weichen und schonenden Schaumstoff wird der Inhalt deines Koffers zudem gut geschützt. WIR MACHEN ES DIR EINFACH: die Tasche lässt sich schnell und einfach mit ein paar Handgriffen im Deckel befestigen. UNSER QUALITÄTSVERSPRECHEN: genau wie die Koffer, muss auch das Zubehör von B&W umfangreiche Tests bestehen, bevor es auf den Markt kommt. So kannst du dir immer sicher sein, das B&W für höchste Qualität steht. Mit den Produkten von B&W sind deine Wertsachen optimal geschützt. DAS BEKOMMST DU: 1x DeckeltascheDer gezeigte Koffer sowie der Inhalt sind nicht im Lieferumfang enthalten!

SICHER IST SICHER: der Schaumeinsatz von B&W bietet dir deine eigene maßgeschneiderte Lösung für jeden Anwendungsbereich und setzt dabei Maßstäbe für Zuverlässigkeit, Qualität und Sicherheit. SO INDIVIDUELL WIE DU: du kannst die Schaumeinlagen schnell und einfach auf deine Bedürfnisse anpassen - ganz individuell. UNSER QUALITÄTSVERSPRECHEN: genau wie die Koffer, muss auch das Zubehör von B&W umfangreiche Tests bestehen, bevor es auf den Markt kommt. So kannst du dir immer sicher sein, das B&W für höchste Qualität steht. DAS BEKOMMST DU: 2x Würfelschaum, 1x Bodeneinlage, 1x Noppenschaum für den Deckel

Perfectly equipped with the outdoor.case type 500Our outdoor.case type 500 guarantees worry-free transport of important property This extremely rugged and compact case protects its contents with an impact-resistant polypropylene (PP) shell and embeds them in soft, high-quality black foam. Valuable and sensitive small parts, such as SD cards, external hard drives, or flash drives, are safely and securely stored in the type 500. This outdoor case is incredibly sturdy, waterproof, and dustproof, and withstands temperature extremes both high and low. Whether in the air, in adverse conditions, or even under water for brief periods, the type 500 is the perfect companion for any trip.All features at a glanceExtremely sturdy case: shell made of polypropylene (PP)Certified under STANAG 4280, DEF STAN 81-41, and ATA 300 UN Certificate of Approval possible on requestStackableDustproofWaterproof (IP67 rating)Temperature-stable from -30 °C to 80 °CAirworthy: automatic air pressure compensation valveTwo eyelets for padlockInner dimensions: 8.1 x 5.7 x 3.1 inchOuter dimensions: 9.1 x 7.1 x 3.5 inchWeight: 0.5 Kg | 1,10Volume: 2.3 LInterior: empty30-year warrantyColor: blackWith optional shoulder strapThe compact and waterproof outdoor.case for any useThe high quality of the outdoor.case type 500 and its extremely rugged shell are certified under STANAG 4280, DEF STAN 81-41, and ATA 300. The case is classified waterproof under the IP protection class, rated IP67 dustproof, and can even protect against water ingress if submerged for brief periods.With you on any trip thanks to automatic air pressure compensation valve and shoulder strapThe air pressure compensation valve built into the type 500 protects the case's contents and its rugged shell, allowing for secure transport on trips. The valve immediately responds to changes in atmospheric pressure, opening and closing accordingly. For prolonged carrying, the optional shoulder strap provides additional comfort by conveniently distributing the weight of the case.Available with variable interior options and in two colorsThe outdoor.case type 500 can be customized for your specific use. The PP shell is available in two colors, black and yellow, and comes either empty or with a removable pick-and-pluck foam insert for the main compartment and a foam insert under the lid for additional protection. To ensure even more security, the type 500 comes with two eyelets for a padlock when needed.

Excellent protection for your DJI Mavic 3 Fly More Combo or Cine Premium Combo! For all photographers, filmmakers and hobby pilots who want the best possible protection for their DJI Mavic 3 drone, B&W International has designed a case with a particularly elegant solution.Due to the exact fit of the inlay, your high-quality DJI Mavic 3 Fly More Combo as well as the exclusive DJI Mavic 3 Cine Premium Combo are optimally protected against dust, water, shocks and falls. Whether it's snow, hail, rain or temperatures from -30°C to +80°C, with this drone case you can take your DJI Mavic 3 anywhere without worry.Thanks to the sophisticated design, the B&W Outdoor Case Type 4000 offers a lot of storage space for your drone and the extensive accessories. Whether DJI RC Pro or DJI RC-N1, two removable foam adapters and a bottom insert allow you to quickly and easily adjust the controller compartment. With this case, too, we at B&W International have remained true to our motto "Where others stop, we really start", and so you have the option of safely transporting up to seven batteries (one of which is in the copter) in the case.  And the highlight of this case: the popular Charge-in-Case function, with which you can charge 3 batteries in the case***.  If you're a little more compact and need less storage space, take a look at our type 3000 DJI Mavic 3 case.All features at a glance:Extremely sturdy case: housing made of polypropylene (PP)Certified according to MIL-STD-810, STANAG 4280, DEF STAN 81-41 and ATA 300 Airworthy: automatic pressure equalisation valveStable, dust-tight, waterproof to IP67Temperature stable from -30 °C to +80 °C Name plateStackableLid pocketTwo eyes for padlocks (Ø 7.0 mm) Rubberised handleSpecially designed snap locks: convenient opening and closing of the caseInner dimensions: 385 x 265 x 165 mmOutside dimensions: 420 x 325 x 180 mmWeight without packaging: 2.68 kgWeight with packaging: 3.12 kgVolume: 16,6 lAvailable in 3 colours: black, yellow, grey30 years warranty**Possible accessories: shoulder strap (item no. CS/3000), mesh bag (item no. MB/3000), wall mount (item no. WM/3000)***Please note that the lid of the case must be open when loading.DJI Drone and accessories are not included in the delivery.

Der Premium PARADOC Businesscase besteht aus robustem, stoßfestem Rindsleder. Der zeitlose Rollenkoffer ist bestens für den Einsatz im Office-Bereich geeignet. Er fasst Ordner und Dokumente, ein separates gepolstertes Notebookfach (ca. 425x50x285mm). Zwei Zahlenschlösser schützen den Inhalt des PARADOC Businesscase vor unbefugtem Zugriff und vor Diebstahl. Ordner können in diesem Koffer aufrecht transportiert werden. Stiftschlaufen und Visitenkartenfächer sorgen für zusätzliche Ordnung. Er hat ein Volumen von ca. 26 Litern und ist ca. 5,4 kg schwer. Das integrierte Trolley-Laufrollensystem sorgt für einen einfachen und komfortablen Transport.FUNKTIONENhochwertig verarbeiteter Rindsleder-Koffer in SchwarzRollensystem mit gummierten, kugelgelagerten Laufrollen2 Koffer-Schlösser mit Zahlencode, bicolor1 gepolstertes Notebookfach1 dreiteiliges Dokumentenfach AUSSTATTUNGMit aufgesetzter Vortasche für DIN A4Innen mit 3-tlg. Einsteckfächer jeweils ca. 410 x 265 mm1 gepolstertes Notebookfach ca.425 x 50 x 285 mm2 Visitenkartenfächer2 StiftschlaufenOrdner sind aufrecht stellbar2 Zahlenschlösser bicolorGriffloch4-fach Teleskopauszug ca. 1.020 mmGummierte kugelgelagerte LaufrollenLieferumfangParadoc Businesscase2 Schlüssel

NEW! The Profikoffer Shoulder Strap - The comfortable shoulder strap for carrying the THE OUTDOOR.CASES!  This comfortable shoulder strap makes carrying the case easier. The shoulder strap is adjustable in length, padded and adapts perfectly to your shoulder. All features at a glance Available for type 3000, 4000, 5000, 6000, 6040, 6500 Simply hooked onto the case on both sidesMade of robust and weatherproof nylonThe shown outdoor.case is not included in delivery.

The outdoor case—without limits! An extremely stable case for the outdoors that can actually withstand any roughness is a rare thing. Our outdoor.case type 1000 steps in where other cases give up. The shell is made of impact-resistant, heat-resistant polypropylene (PP). The case’s design has been precisely engineered for the variety of external influences found outdoors. This means that wherever you stow it, the rubber seal on the outdoor.case will seal it up completely when closed and the additional egg crate foam under the lid will protect what you put inside the case. This makes it ideal as a camera case or DJI Mavic Pro accessory. It is also practical: This outdoor.case is stackable, making it always well organized even in large numbers.All features at a glanceExtremely stable case: shell made of polypropylene (PP)UN Certificate of Approval UN 2380/81 & UN 3090/91StackableDustproofTemperature-stableWaterproof (IP67 rating)Airworthy: automatic pressure equalization valveEgg crate foam under lidEyelets for padlock Weight: 0.7 kgVolume: 4.1 LAvailable in four colors: black, yellow, gray, orangeInterior options: empty, divider system (RPD), precut pick-and-pluck foam (SI)30-year warrantyThe type 1000: a waterproof case for every occasionThe outdoor.case type 1000 is not only a waterproof case, it is also perfectly protected from dust and fluctuating temperatures. This has been confirmed by national and international certifications, such as the UN Certificates of Approval UN 2380/81 & UN 3090/91 and the IP67 rating.outdoor.case with practical pressure equalization valveAn airtight case is practical. Even more practical is the pressure equalization valve in our outdoor.cases, which automatically equalizes the pressure in the case. This allows the outdoor.case type 1000 to go anywhere your trip takes you—even on an airplane. Thanks to the two-way pressure equalization valve, temperature and pressure changes are completely offset automatically.As a camera case or an outdoor case: The outdoor.case type 1000 is as flexible as you are!Give your outdoor case type 1000 a custom upgrade and make it ready for any challenge. Start with the exterior: The PP shell comes in four appealing colors: black, yellow, gray, and orange. So far, so good. For the interior of the outdoor.case type 1000, you can choose between readily customizable pick-and-pluck foam, a padded divider system, and/or a practical lid pouch or mesh pocket. A mounting frame can also be purchased (for mounting instrument panels, for example) for the type 1000. This ideal outdoor case is rounded out with our matching shoulder strap for comfortable transport.

Type 3000 GoPro 9/10 - outdoor.case for the GoPro 9 & accessories! The case for your GoPro Hero 9/10 Actioncams + accessories! Thanks to its size and the two custom foam layers it provides enough space for up to three GoPro Hero 9 and the necessary accessories: GoPro Media MOD, waterproof housing, up to 7 batteries, the dual battery charger, up to 8 microSD memory cards, floating hand grip, mounting brackets, cables and much more. A spares compartment (195 x 60 x 60 mm) in first layer and 3 spares compartments (2 compartments each 145x 90 x 33 mm / 1 compartment 305 x 105 x 33 mm) in second layer offers space for additional accessories and it is possible to charge two batteries directly in the case.All features at a glance    Extremely stable case: shell made of polypropylene (PP)    Stackable    Dustproof    Temperature-stable    Waterproof (IP67 rating)    Airworthy: automatic pressure equalization valve    Egg crate foam under lid    Eyelets for padlock    Inner dimensions: 330 x 235 x 150 mm    Outer dimensions: 365 x 295 x 170 mm    Weight: 1.7 kg    Volume: 11.7 L    Color: black    Optional accesssoires: shoulder strap, lid pocket, mesh bag, wall mount    30-year warrantyGoPro and accessories are not included in the delivery

The perfect protection for the RØDE Link Filmmaker Kit! Extremely stable case and perfect 3-D foam. This is how the RØDE Link Filmmaker Kit is best protected from falls, dust and water. Space for a total of 2 kits (2 x transmitters, 2 x receivers, 2 x microphones + 4 x spare batteries).An extremely stable case for the outdoors that can actually withstand any roughness is a rare thing. Our outdoor.case type 1000 steps in where other cases give up. The shell is made of impact-resistant, heat-resistant polypropylene (PP). The case’s design has been precisely engineered for the variety of external influences found outdoors. This means that wherever you stow it, the rubber seal on the outdoor.case will seal it up completely when closed and the additional egg crate foam under the lid will protect what you put inside the case. This makes it ideal as a camera case or DJI Mavic Pro accessory. It is also practical: This outdoor.case is stackable, making it always well organized even in large numbers.All features at a glance:Extremely stable case: shell made of polypropylene (PP)UN Certificate of Approval UN 2380/81 & UN 3090/91StackableDustproofTemperature-stableWaterproof (IP67 rating)Airworthy: automatic pressure equalization valveEgg crate foam under lidEyelets for padlock Weight: 0.7 kgVolume: 4.1 LAvailable in four colors: black, yellow, gray, orangeInterior options: empty, divider system (RPD), precut pick-and-pluck foam (SI)30-year warrantyThe type 1000: a waterproof case for every occasionThe outdoor.case type 1000 is not only a waterproof case, it is also perfectly protected from dust and fluctuating temperatures. This has been confirmed by national and international certifications, such as the UN Certificates of Approval UN 2380/81 & UN 3090/91 and the IP67 rating. outdoor.case with practical pressure equalization valveAn airtight case is practical. Even more practical is the pressure equalization valve in our outdoor.cases, which automatically equalizes the pressure in the case. This allows the outdoor.case type 1000 to go anywhere your trip takes you—even on an airplane. Thanks to the two-way pressure equalization valve, temperature and pressure changes are completely offset automatically.The shown case contents are not included in the scope of delivery.

Indestructible, practical, and elegant: that is the type 6040! Our outdoor.case type 6040 is an elegant and slim outdoor case specially designed to securely transport media devices such as notebooks and tablets. The indestructible shell made of polypropylene is dust- and waterproof, and keeps precious contents protected from anything. The sturdy shell can even withstand drops and impacts with ease, keeping expensive devices and accessories intact at all times, regardless of the situation. The two-step closures make the type 6040 ultra easy to open and close, and the interior can be customized with diverse layout options.All features at a glance    Extremely sturdy case: shell made of polypropylene (PP)    Certified under STANAG 4280, DEF STAN 81-41, and ATA 300    Stackable    Dustproof    Waterproof (IP67 rating)    Temperature-stable from -30 °C to 80 °C    Airworthy: automatic air pressure equalization valve    Two eyelets for padlock    Inner dimensions: 18.7 x 14.0 x 4.9 inch    Outer dimensions: 20.2 x 16.5 x 5.8 inch    Weight: 3.8 Kg    Volume: 21.0 L    Ergonomic two-component handle    Two-step closures    Optional lift-off hinge for a removable lid   Interior: with pre-cut foam    With optional shoulder strap    Optional power supply pocket    Built-in frame    Built-in aluminum frame    Color: black    30-year warrantyHandy and airworthy thanks to automatic air pressure equalization valveWherever the journey may take you, the type 6040 is your faithful companion for dependably protecting expensive technology and other accessories. The built-in air pressure equalization valve automatically opens once the atmospheric pressure changes in order to stabilize the pressure inside the case. This protects the case’s shell and contents, and allows the case to be taken flights. The type 6040 is rated IP67 dustproof and waterproof, and can handle extreme temperatures from -30 °C to 80 °C with ease.Maximum carrying comfort with shoulder strap and ergonomic handleThe outdoor.case type 6040 can transport even heavy equipment anywhere with ease. The ergonomic two-component handles rest perfectly in the hand. For additional carrying comfort, a B&W shoulder strap option is available that conveniently distributes the weight of the case. For important documents, an optional document pouch can be attached inside the lid.Variable interior for any need Our type 6040 comes with an array of variable interior options. For additional protection, a removable foam insert precut into cubes is available for the main compartment and an egg crate foam insert is available for the lid of the case. The case lid can be removed completely with lift-off hinges.

SICHER IST SICHER: der Schaumeinsatz von B&W bietet dir deine eigene maßgeschneiderte Lösung für jeden Anwendungsbereich und setzt dabei Maßstäbe für Zuverlässigkeit, Qualität und Sicherheit. SO INDIVIDUELL WIE DU: du kannst die Schaumeinlagen schnell und einfach auf deine Bedürfnisse anpassen - ganz individuell. UNSER QUALITÄTSVERSPRECHEN: genau wie die Koffer, muss auch das Zubehör von B&W umfangreiche Tests bestehen, bevor es auf den Markt kommt. So kannst du dir immer sicher sein, das B&W für höchste Qualität steht. DAS BEKOMMST DU: 5x Würfelschaum, 1x Bodeneinlage, 1x Noppenschaum für den Deckel

The stable adventure case! Extremely rugged, dustproof, waterproof, temperature-stable, stackable: Our outdoor cases have everything it takes to stand up to nature. One of the features that guarantees this is the super stable polypropylene (PP) material used to manufacture our outdoor.cases. To make the case as sturdy and secure as possible, the design and every single function took years to develop and are continually tested. This is what makes us confident enough to offer a full 30-year warranty on our outdoor cases series.All features at a glanceExtremely stable case: shell made of polypropylene (PP)UN Certificate of ApprovalStackableDustproofTemperature-stableWaterproof (IP67 rating)Airworthy: automatic pressure equalization valveEgg crate foam under lidEyelets for padlockInner dimensions: 13 x 9.3 x 5.9 inchOuter dimensions: 14.4 x 11.6 x 6.7 inchWeight: 1.95 KgVolume: 11.7 LColor: orangeInterior: with pre-cut foam (SI)30-year warrantyA waterproof case for any useOur outdoor.case type 3000 is not only a waterproof case… it is also dustproof, temperature-stable, and can withstand hard impacts. This is due to the case’s design, which was thought out down to the smallest detail, its rugged and dependable materials that harmonize with one another flawlessly, and its many other functions. We are not the only ones who think so: The ruggedness and reliability of our outdoor.cases have been and are regularly tested, inspected, and certified by national and international bodies. Our outdoor cases have received the UN Certificate of Approval, among others, are certified under ATA 300 and STANAG 4280, and are rated IP67.Our outdoor.case type 3000 is airworthyExpensive, sensitive equipment is wonderfully stored in our outdoor.case type 3000. Even on flights, this outdoor case is a loyal companion and protector. Thanks to the standard built-in pressure equalization valve, this outdoor case automatically regulates the pressure inside. Whether temperature and pressure fluctuations, or hard impacts: The pressure equalization valve steps in and provides total protection.As a DJI Mavic Pro accessory, GoPro accessories case, or microphone case: What will your outdoor.case type 3000 be?Our outdoor.case type 3000 adapts to you and your equipment: whether as a DJI Mavic Pro accessory, a microphone and camera case, or as a GoPro accessories case. All of this is possible with a flexible interior, available as an accessory for the case. The outdoor case type 3000 can be enhanced and customized with either precut pick-and-pluck foam or a padded divider system. The lid of the outdoor.case comes standard with egg crate foam—to upgrade, we also offer a mesh pocket for small equipment or a lid pouch for storing things like documents. An additional mounting frame is also available (for mounting things like instrument panels). We also offer a practical shoulder strap for convenient and safe transport. Highly comfortable: If you do not want to bend down over the case, you might consider a sturdy wall mount accessory.

The case for your GoPro Actioncam 9 and 10 + Accessories! Thanks to its custom foam insert it provides sufficient space for your GoPro Hero 9/10 and the accessories: the dual battery charger, up to 3 batteries, floating hand grip, up to 7 microSD memory cards, mounting brackets and cables. The spares compartment (92 x 62 x 57 mm) offers space for additional accessories and it is possible to charge two batteries directly in the case.All features at a glance    case shell made of polypropylene (PP)    certified with the STANAG 4280, DEF STAN 81-41 and ATA 300 standards    automatic air pressure compensation valve    strong, dustproof, waterproof (IP67 certified)    temperature resistant from -30 °C up to +80 °C    rubberized handle stackable two eyelets for padlocks (Ø 0.2 inch)    Inner dimensions: 9.8 x 6.9 x 3.7 inch    Outer dimensions: 10.6 x 8.5 x 4.1 inch    Weight: 0.7 kg    Volume: 4.1 L    30 year warrantyThe content shown in the case is not included in the delivery.

Excellent protection for your DJI Mavic 3 Fly More Combo or Cine Premium Combo! For all photographers, filmmakers and hobby pilots who want the best possible protection for their DJI Mavic 3 drone, B&W International has designed a case with a particularly elegant solution.Due to the exact fit of the inlay, your high-quality DJI Mavic 3 Fly More Combo as well as the exclusive DJI Mavic 3 Cine Premium Combo are optimally protected against dust, water, shocks and falls. Whether it's snow, hail, rain or temperatures from -30°C to +80°C, with this drone case you can take your DJI Mavic 3 anywhere without worry.Thanks to the sophisticated design, the B&W Outdoor Case Type 4000 offers a lot of storage space for your drone and the extensive accessories. Whether DJI RC Pro or DJI RC-N1, two removable foam adapters and a bottom insert allow you to quickly and easily adjust the controller compartment. With this case, too, we at B&W International have remained true to our motto "Where others stop, we really start", and so you have the option of safely transporting up to seven batteries (one of which is in the copter) in the case.  And the highlight of this case: the popular Charge-in-Case function, with which you can charge 3 batteries in the case***.  If you're a little more compact and need less storage space, take a look at our type 3000 DJI Mavic 3 case.All features at a glance:Extremely sturdy case: housing made of polypropylene (PP)Certified according to MIL-STD-810, STANAG 4280, DEF STAN 81-41 and ATA 300 Airworthy: automatic pressure equalisation valveStable, dust-tight, waterproof to IP67Temperature stable from -30 °C to +80 °C Name plateStackableLid pocketTwo eyes for padlocks (Ø 7.0 mm) Rubberised handleSpecially designed snap locks: convenient opening and closing of the caseInner dimensions: 385 x 265 x 165 mmOutside dimensions: 420 x 325 x 180 mmWeight without packaging: 2.68 kgWeight with packaging: 3.12 kgVolume: 16,6 lAvailable in 3 colours: black, yellow, grey30 years warranty**Possible accessories: shoulder strap (item no. CS/3000), mesh bag (item no. MB/3000), wall mount (item no. WM/3000)***Please note that the lid of the case must be open when loading.DJI Drone and accessories are not included in the delivery.

Extremely sturdy thanks to polypropylene! The outdoor.case type 4000, just like the other types in our outdoor case series, sports extremely sturdy properties and functions. The shell is made of impact-resistant polypropylene (PP), an extremely sturdy thermoplastic polymer. With this material, the case can easily withstand any external influences while also being highly flexible and comfortable to use, not least thanks to its low weight. Every single model of our outdoor.cases goes through numerous stress tests both before and after launch—this is how we guarantee that every case meets the highest standards in the end. And all that with a 30-year warranty.All features at a glanceExtremely stable case: shell made of polypropylene (PP)UN Certificate of ApprovalStackableDustproofTemperature-stableWaterproof (IP67 rating)Airworthy: automatic pressure equalization valveEgg crate foam under KgEyelets for padlockInner dimensions: 15.2 x 10.4 x 6.5 inchOuter dimensions: 16.5 x 12.8 x 7.1 inchWeight: 2.65 KgVolume: 16.6 LColor: yellow Interior: with pre-cut foam (SI)30-year warrantyTHE outdoor case: waterproof, dustproof, and temperature-stableThe outdoor.case type 4000 is rated IP67. This means this outdoor case is waterproof, dustproof, and temperature-stable. This is due to the material as well as the balanced and precise construction, making this outdoor.case ideally equipped for any use, especially in demanding environments, such as in recreational craft or canoes, but also on aircraft or at dusty construction sites. The versatile, rugged properties of this case not only meet the IP rating, but other national and international bodies have given it their seal or declaration of conformity. All this means your highly sensitive equipment is ideally stored at all times.Airworthy thanks to automatic pressure equalization valveThe standard built-in pressure equalization valve gives the outdoor case even more flexibility, especially for air travel. The valve responds and regulates automatically in the event of pressure and temperature fluctuations as well as hard impacts, dependably protecting the equipment inside the case. The egg crate foam under the lid provides additional padding and security. Our outdoor.case type 4000 is rounded out by other practical accessories and interior customization options...The ideal case for cameras, microphones, DJI Mavic Pro accessories, and moreHow will you use it? Our outdoor.case type 4000 has a customizable interior, and dependably transports and stores things like cameras, microphones, DJI Mavic Pro accessories, and other highly sensitive technology. The type 4000 can be upgraded with, for example, precut pick-and-pluck foam or a padded divider system. For the lid, you can choose either a lid pouch for documents or a mesh pocket for small equipment. Also available for this case type: a practical shoulder strap for comfortable transport, a wall mount for making it easier to work while standing, and a mounting frame for things like instrument panels. This allows the outdoor.case type 4000 to be perfectly adapted for any use and any equipment.

Now with a great new design and the usual excellent protection for the Matterport Pro2 3D camera!Here it is, the 4th generation of our globally popular Matterport Cases 5000. We had a lot of conversations with users of the Matterport camera to find out which requirements our cases should meet. The result is a great case with space for all accessories in the smallest of spaces. There is space for cameras, power packs, door wedges, tablets and much more in our Matterport Cases.The new professional case 3D foam "made in Germany"The specially made 3D foam insert in the color black/blue/red was developed by us and manufactured in Germany. The precisely fitting camera cut-out offers your Matterport Pro2 3D as well as the Pro and Pro2 Lite a perfect hold. A storage compartment with a removable lid offers space for the power pack, a power bank or similar.From now on we are using a solid and dimensionally stable, two-tone plastic plate with an anthracite-colored satin finish. This surface is perfect for applying logos or lettering by laser. All features at a glance:Extremely sturdy case: shell made of polypropylene (PP)Certified under STANAG 4280, DEF STAN 81-41, and ATA 300UN Certificate of Approval possible on requestStackableDustproofWaterproof (IP67 rating)Temperature-stable from -30 °C to 80 °CAirworthy: automatic air pressure equalization valveTwo eyelets for padlockInner dimensions: 16.9 x 11.8 x 6.7 inchOuter dimensions: 18.5 x 14.4 x 7.5 inchWeight: 3.9 Kg | 6,39 IbVolume: 22.1 LRubberized gripInterior: Matterport Camera 3D foamColor: black30-year warrantyExtensive accessories: shoulder strap, backpack system, wall mountNo matter how the type 5000 is used, its extensive accessories make it ready for any situation. Traveling photographers, for example, can conveniently transport the type 5000 and all of their equipment by attaching the backpack system. An optional shoulder strap that can be connected to the outdoor.case in a second also provides additional carrying comfort. For working at a comfortable height and securing the outdoor case in place, the type 5000 is compatible with B&W’s wall mount. Other accessories include a mesh pocket and a lid pouch. The type 5000: an outdoor case without limits.Waterproof, temperature-stable, and airworthy: This case can really do it allThe extremely rugged polypropylene shell is not only impact-resistant and scratchproof, it is also dustproof and even protects the contents when submerged in cold water for brief periods. Whether hot or ice cold, the type 5000 is ready, since it can withstand temperatures from -30 °C to 80 °C without difficulty. The automatic air pressure equalization valve makes air travel possible: The valve opens/closes as soon as there is a change in atmospheric pressure, equalizing the pressure inside the case to protect both shell and contents.Cameras and accessories are not included in the scope of delivery.

Flexible, spacious, and rugged: that is the flex! Our tool.case flex from our pro.case series meets any need and is ready for any use. With a stately volume of 35 L, every tool is always at hand and ready for use. The rugged shell, made of ultra durable ABS plastic, withstands impacts and falls, and dependably protects the tools inside. Four additional feet on the bottom keep the flex stable on any surface while also preventing scratches on the shell. Three variable interior options give this tool case diverse design possibilities. A jack of all trades in storage with a sturdy design.All features at a glance:    Case made of ultra sturdy ABS plastic    Rugged aluminum rim with reinforced corners    With locking latches    With B&W PROcode combination lock    Ergonomic handle    Hinged lid    Safety lid holder    Main compartment with aluminum divider system    Four feet    Volume: 35 L    A4 document pouch in lid    With three different interior systems    Color: blackMade of rugged ABS material with reinforced cornersIn our tool.case flex, all of your tools and important documents are perfectly stored. The ultra sturdy ABS plastic used to make the shell can withstand almost anything. The resilient design of this powerhouse can take impacts and falls with ease. The B&W PROcode combination lock and two locking latches mean the flex can be securely locked up.With document pouch and three variable interior optionsWhether tool loops, tool pockets, or tool holders: Different interiors are available for the flex depending on your need and use. The tool case comes standard with an A4 document pouch and a main compartment that can be freely arranged with our patented aluminum divider system. The following interior options are also available:    Removable tool boards under lid and as cover for the main compartment with a total of 111 tool loops distributed across the front and back of the boards    Removable tool boards under lid and as cover for the main compartment with a total of 37 tool pockets distributed across the front and back of the boards    Removable tool boards under lid and as cover for the main compartment with a total of 9 module tool holders distributed across the front and back of the boardsFour feet for guaranteed stabilityThe four feet on the bottom of the case provide additional stability and even more security for both shell and tools. Scratches are a thing of the past and flex will continue to look brand new for a long time to come. The rugged handle ensures comfortable transport.Tools shown are not included in the delivery.Flexible, spacious, and rugged: that is the flexOur tool.case flex from our pro.case series meets any need and is ready for any use. With a stately volume of 35 L, every tool is always at hand and ready for use. The rugged shell, made of ultra durable ABS plastic, withstands impacts and falls, and dependably protects the tools inside. Four additional feet on the bottom keep the flex stable on any surface while also preventing scratches on the shell. Three variable interior options give this tool case diverse design possibilities. A jack of all trades in storage with a sturdy design.All features at a glance:    Case made of ultra sturdy ABS plastic    Rugged aluminum rim with reinforced corners    With locking latches    With B&W PROcode combination lock    Ergonomic handle    Hinged lid    Safety lid holder    Main compartment with aluminum divider system    Four feet    Volume: 35 L    A4 document pouch in lid    With three different interior systems    Color: blackMade of rugged ABS material with reinforced cornersIn our tool.case flex, all of your tools and important documents are perfectly stored. The ultra sturdy ABS plastic used to make the shell can withstand almost anything. The resilient design of this powerhouse can take impacts and falls with ease. The B&W PROcode combination lock and two locking latches mean the flex can be securely locked up.With document pouch and three variable interior optionsWhether tool loops, tool pockets, or tool holders: Different interiors are available for the flex depending on your need and use. The tool case comes standard with an A4 document pouch and a main compartment that can be freely arranged with our patented aluminum divider system. The following interior options are also available:    Removable tool boards under lid and as cover for the main compartment with a total of 111 tool loops distributed across the front and back of the boards    Removable tool boards under lid and as cover for the main compartment with a total of 37 tool pockets distributed across the front and back of the boards    Removable tool boards under lid and as cover for the main compartment with a total of 9 module tool holders distributed across the front and back of the boardsFour feet for guaranteed stabilityThe four feet on the bottom of the case provide additional stability and even more security for both shell and tools. Scratches are a thing of the past and flex will continue to look brand new for a long time to come. The rugged handle ensures comfortable transport.Tools shown are not included in the delivery.

Versatile, convertible and Versatile, changeable and extremely robust: This is the typ 5000!  The outdoor.case type 5000 is an outdoor case that truly leaves nothing to be desired. Specially designed to meet the needs of professional photographers, it dependably protects highly sensitive equipment such as cameras, lenses, flashes, batteries, and memory cards while also being handy, compact, and easy to transport. The extremely rugged polypropylene shell absorbs impacts easily without the contents being damaged. Since the best photo opportunities are found all over the world, the type 5000 comes with an automatic air pressure equalization valve, making it a loyal companion even when traveling by air. We at B&W believe in the high quality of our cases, which is why the type 5000 also comes with a 30-year warranty. All features at a glance Extremely sturdy case: shell made of polypropylene (PP)Certified under STANAG 4280, DEF STAN 81-41, and ATA 300UN Certificate of Approval possible on requestStackableDustproofWaterproof (IP67 rating)Temperature-stable from -30 °C to 80 °CAirworthy: automatic air pressure equalization valveTwo eyelets for padlockInner dimensions: 16.9 x 11.8 x 6.7 inchOuter dimensions: 18.5 x 14.4 x 7.5 inchWeight: 2.85 KgVolume: 22.1 LRubberized gripOptional lift-off hinge for a removable lidInterior: emptyColor: black30-year warranty Extensive accessories: shoulder strap, backpack system, mesh pocket, mounting frame, and wall mount No matter how the type 5000 is used, its extensive accessories make it ready for any situation. Traveling photographers, for example, can conveniently transport the type 5000 and all of their equipment by attaching the backpack system. An optional shoulder strap that can be connected to the outdoor.case in a second also provides additional carrying comfort. For working at a comfortable height and securing the outdoor case in place, the type 5000 is compatible with B&W’s wall mount. Other accessories include a mesh pocket and a lid pouch. The type 5000: an outdoor case without limits.Waterproof, temperature-stable, and airworthy: This case can really do it allThe extremely rugged polypropylene shell is not only impact-resistant and scratchproof, it is also dustproof and even protects the contents when submerged in cold water for brief periods. Whether hot or ice cold, the type 5000 is ready, since it can withstand temperatures from -30 °C to 80 °C without difficulty. The automatic air pressure equalization valve makes air travel possible: The valve opens/closes as soon as there is a change in atmospheric pressure, equalizing the pressure inside the case to protect both shell and contents.Black, yellow, orange: Which color shall it be?Aside from the classic black, the type 5000 comes in yellow and orange for those who want a splash of color. The outdoor case has different interior options depending on your need:EmptyWith precut, removable pick-and-pluck foam in main compartment and egg crate foam under lidWith padded insert made of washable nonwoven fabric in a variable divider system for main compartment and egg crate foam under lid 

Die Facheinteilung passgenau für den Typ 3000 kann schnell und einfach an deine individuellen Bedürfnisse anpassen werden. SO INDIVIDUELL WIE DU: du kannst die Facheinteilung individuell auf deine Bedürfnisse anpassen. Ob Drohne, Kamera, Angelausrüstung, Jagdausrüstung oder was auch immer du schützen möchtest, mit dem Einsatz von B&W bist du auf der sicheren Seite! SICHER IST SICHER: die Facheinteilung von B&W bietet dir deine individuelle Lösung für jeden Anwendungsbereich und setzt dabei Maßstäbe für Zuverlässigkeit, Qualität und Sicherheit. WIR MACHEN ES DIR EINFACH: die unterschiedlichen Stege kannst du dank Klett & Flausch immer wieder einfach und schnell konfigurieren. Zudem ist der gepolsterte Koffereinsatz aus abwaschbaren Gewebematerial leicht zu reinigen. UNSER QUALITÄTSVERSPRECHEN: genau wie die Koffer, muss auch das Zubehör von B&W umfangreiche Tests bestehen, bevor es auf den Markt kommt. So kannst du dir immer sicher sein, das B&W für höchste Qualität steht. Mit den Produkten von B&W sind deine Wertsachen optimal geschützt. DAS BEKOMMST DU: 1x Facheinteilung, 1x Noppenschaum für den DeckelDer gezeigte Koffer ist nicht im Lieferumfang enthalten!

An outdoor case for the next generationAn outdoor case needs to be ready for anything. Highly sensitive equipment, such as cameras, drones, or electronic measuring equipment, need protective storage at all times. This is what makes our outdoor.case type 2000 the ideal and, above all, reliable companion. The exceptionally sturdy polypropylene (PP) that makes up the case, combined with a dependable rubber seal and standard egg crate foam under the lid, protects contents from damage at all times and under all circumstances. The ergonomic design not only provides ideal transport, it also makes our type 2000 stackable with other outdoor.cases.All features at a glance:Extremely stable case: shell made of polypropylene (PP)UN Certificate of Approval possible on requestStackableDustproofTemperature-stableWaterproof (IP67 rating)Airworthy: automatic pressure equalization valveEgg crate foam under lidEyelets for padlockInner dimensions: 9.8 x 6.9 x 6.1 inchOuter dimensions: 10.6 x 8.5 x 6.5 inchWeight: 1,1 KgVolume: 6.6 LColor: yellowInterior: divider system (RPD)30-year warrantyThe type 2000: a dustproof, temperature-resistant, waterproof case Our type 2000 is a dustproof, temperature-resistant, and waterproof case that is ideal for the outdoors. The combination of rugged materials, sophisticated design, and customizable interior make this case an absolutely safe storage option for cameras, audio equipment, DJI Mavic drones, and more. This has been recognized by not just one but six national and international certifications (IP67, UN Certificate of Approval, MIL-STD-810H, and more).Outdoor case with automatic pressure equalizationTaking your outdoor case with you on a flight: now no longer a problem. The standard built-in pressure equalization valve automatically compensates for temperature and pressure fluctuations as well as hard impacts. This keeps your equipment secure even on turbulent flights.The outdoor case type 2000 as a camera case, DJI Mavic accessory, and moreThe outdoor.case type 2000 is as flexible as you need it to be. It can be a camera case or a safe transport option for DJI Mavic Pro accessories. The uses are limitless. The rugged PP shell is available in two colors: simple black or striking yellow. For the interior, you can choose between precut pick-and-pluck foam or a padded divider system. For the underside of the lid, a practical pouch or mesh pocket are available. If you need room for an instrument panel, a mounting frame can be included or purchased separately. Lastly, our shoulder strap accessory ensures optimal and comfortable transport.

Excellent protection for your DJI Mavic 3 Fly More Combo or Cine Premium Combo! For all photographers, filmmakers and hobby pilots who want the best possible protection for their DJI Mavic 3 drone, B&W International has designed a case with a particularly elegant solution.Due to the exact fit of the inlay, your high-quality DJI Mavic 3 Fly More Combo as well as the exclusive DJI Mavic 3 Cine Premium Combo are optimally protected against dust, water, shocks and falls. Whether it's snow, hail, rain or temperatures from -30°C to +80°C, with this drone case you can take your DJI Mavic 3 anywhere without worry.Thanks to the sophisticated design, the B&W Outdoor Case Type 4000 offers a lot of storage space for your drone and the extensive accessories. Whether DJI RC Pro or DJI RC-N1, two removable foam adapters and a bottom insert allow you to quickly and easily adjust the controller compartment. With this case, too, we at B&W International have remained true to our motto "Where others stop, we really start", and so you have the option of safely transporting up to seven batteries (one of which is in the copter) in the case.  And the highlight of this case: the popular Charge-in-Case function, with which you can charge 3 batteries in the case***.  If you're a little more compact and need less storage space, take a look at our type 3000 DJI Mavic 3 case.All features at a glance:Extremely sturdy case: housing made of polypropylene (PP)Certified according to MIL-STD-810, STANAG 4280, DEF STAN 81-41 and ATA 300 Airworthy: automatic pressure equalisation valveStable, dust-tight, waterproof to IP67Temperature stable from -30 °C to +80 °C Name plateStackableLid pocketTwo eyes for padlocks (Ø 7.0 mm) Rubberised handleSpecially designed snap locks: convenient opening and closing of the caseInner dimensions: 385 x 265 x 165 mmOutside dimensions: 420 x 325 x 180 mmWeight without packaging: 2.68 kgWeight with packaging: 3.12 kgVolume: 16,6 lAvailable in 3 colours: black, yellow, grey30 years warranty**Possible accessories: shoulder strap (item no. CS/3000), mesh bag (item no. MB/3000), wall mount (item no. WM/3000)***Please note that the lid of the case must be open when loading.DJI Drone and accessories are not included in the delivery.

Sturdy storage wonder on quiet casters: the B&W outdoor.case type 6700 outdoor transport case! Whether completely empty with its full 42.8 L of storage space or padded with egg crate foam and divided up with padded Velcro dividers: The B&W outdoor.case type 6700 adapts perfectly to any requirements for a flexible outdoor transport case. It stores sensitive technical equipment and accessories safely and securely so everything stays put and intact even when things get bumpy. Three convenient carry handles and a telescoping handle provide maximum transport comfort on any path. Four high-quality latches and two eyelets for additional padlocks also ensure that contents are as secure as possible. The outdoor.case type 6700 outdoor transport case is the ideal companion for any kind of field work.All features at a glance    Ultra sturdy shell made of polypropylene (PP)    Certified under STANAG 4280, DEF STAN 81-41, and ATA 300    Stackable    Dustproof and waterproof (IP67 rating)    Temperature-stable from -30 °C to 80 °C    Airworthy: automatic air pressure equalization valve    Variable divider system    Smooth-running casters    Telescoping handle    Two eyelets for a padlocks (7 mm diameter)    Inner dimensions: 21.1 x 14.2 x 8.9 inch    Outer dimensions: 24.0 x 16.9 x 10.4 inch    Weight: 6.8 Kg    Volume: 42.8 l    Interior: with variable divider system    Rubberized carry handle    Ventilated but also liquid-repellent    Spring locks for firm closure    30-year warranty    Colors: blackThe B&W outdoor.case type 6700 transport case: stackable, optional padding, and with variable divider systemThe boxy, functional design and sturdy shell make the outdoor.case type 6700 transport case stackable, so it is easy to store. The interior, with optional foam inserts or variable divider system, can optimally store and transport any equipment or sensitive devices. The custom divider system is quick and easy to set up thanks to padded dividers and a practical, sturdy Velcro fastening system.The ideal B&W rolling camera case for the safest camera transportWhether an amateur enthusiast or a professional outdoor photographer: The outdoor.case type 6700 is the ideal rolling camera case for transporting high-quality, sensitive camera equipment, especially on extended trips. The impact-resistant, ultra sturdy polypropylene shell provides adequate protection for sensitive contents at all times, even in the event of impacts or falls. Individual components can be securely stored in separate, organized padded compartments, eliminating the need to worry about expensive equipment colliding together after a stumble or vibration. The outdoor.case type 6700 by B&W is the ideal rolling camera case for any traveling photographer.Guaranteed and certified transport safety with B&W's outdoor.casesB&W's outdoor.cases boast functionality, convenience, and sturdiness, as has been officially confirmed in multiple tests: The B&W outdoor.case type 6700 rolling transport case has been certified under STANAG 4280, DEF STAN 81-41, and ATA 300, and has been rated IP67 dustproof and waterproof. The type 6700 remains completely sealed even in extremely dusty environments or after brief periods submerged in water, and protects its contents against damage.